基于流体力学的金属增材制造过程仿真研究

References

9.4 Conclusions

9.3 Experimental methods

9.2 Model and theoretical calculation

9.1 Introduction

Chapter 9 Investigation of laser polishing of four Laser-based Powder Bed Fusion alloy samples

References

8.5 Conclusions

8.4 Numerical results and discussion

8.3 Model and simulation

8.2 Experimental procedures

8.1 Introduction

Chapter 8 Evolution of multi pores in Ti-6Al-4V/Al-Si-10Mg alloy during laser post-processing

References

7.5 Conclusions

7.4 Numerical results and discussion

7.3 Modeling and simulation

7.2 Experimental procedures

7.1 Introduction

Chapter 7 Influence of laser postprocessing on pore evolution of Ti-6Al-4V alloy by Laser-based Powder Bed Fusion

References

6.4 Conclusions

6.3 Results

6.2 Modeling and simulation

6.1 Introduction

Chapter 6 Simulation of surface deformation control during Laser-based Powder Bed Fusion Al-Si-10Mg powder using an external magnetic field

References

5.5 Conclusions

5.4 Results and discussions

5.3 Experimental procedures

5.2 Modeling approach and numerical simulation

5.1 Introduction

Chapter 5 Evolution of molten pool during Laser-based Powder Bed Fusion of Ti-6Al-4V

References

4.4 Summary and conclusions

4.3 Simulation results and discussions

4.2 Simulation model of L-PBF printer

4.1 Introduction

Chapter 4 Numerical investigation of controlling spatters with negative pressure pipe in Laser-based Powder Bed Fusion process

References

3.4 Summary and conclusions

3.3 Simulation results and discussion

3.2 Simulation model of L-PBF printer

3.1 Introduction

Chapter 3 Investigation of optimizing the flow field with fluid cover in Laser-based Powder Bed Fusion manufacturing process

References

2.4 Conclusions

2.3 Simulation results

2.2 Simulation model of the L-PBF printer

2.1 Introduction

Chapter 2 Investigation of the flow field in Laser-based Powder Bed Fusion manufacturing

1.3 Outline

1.2 Motivation

1.1 Background

Chapter 1 Introduction

Preface

内容简介

版权信息

封面

封面

版权信息

内容简介

Preface

Chapter 1 Introduction

1.1 Background

1.2 Motivation

1.3 Outline

Chapter 2 Investigation of the flow field in Laser-based Powder Bed Fusion manufacturing

2.1 Introduction

2.2 Simulation model of the L-PBF printer

2.3 Simulation results

2.4 Conclusions

References

Chapter 3 Investigation of optimizing the flow field with fluid cover in Laser-based Powder Bed Fusion manufacturing process

3.1 Introduction

3.2 Simulation model of L-PBF printer

3.3 Simulation results and discussion

3.4 Summary and conclusions

References

Chapter 4 Numerical investigation of controlling spatters with negative pressure pipe in Laser-based Powder Bed Fusion process

4.1 Introduction

4.2 Simulation model of L-PBF printer

4.3 Simulation results and discussions

4.4 Summary and conclusions

References

Chapter 5 Evolution of molten pool during Laser-based Powder Bed Fusion of Ti-6Al-4V

5.1 Introduction

5.2 Modeling approach and numerical simulation

5.3 Experimental procedures

5.4 Results and discussions

5.5 Conclusions

References

Chapter 6 Simulation of surface deformation control during Laser-based Powder Bed Fusion Al-Si-10Mg powder using an external magnetic field

6.1 Introduction

6.2 Modeling and simulation

6.3 Results

6.4 Conclusions

References

Chapter 7 Influence of laser postprocessing on pore evolution of Ti-6Al-4V alloy by Laser-based Powder Bed Fusion

7.1 Introduction

7.2 Experimental procedures

7.3 Modeling and simulation

7.4 Numerical results and discussion

7.5 Conclusions

References

Chapter 8 Evolution of multi pores in Ti-6Al-4V/Al-Si-10Mg alloy during laser post-processing

8.1 Introduction

8.2 Experimental procedures

8.3 Model and simulation

8.4 Numerical results and discussion

8.5 Conclusions

References

Chapter 9 Investigation of laser polishing of four Laser-based Powder Bed Fusion alloy samples

9.1 Introduction

9.2 Model and theoretical calculation

9.3 Experimental methods

9.4 Conclusions

References